SUPERONE Magnetic Ring Holder User Manual - Dual-Side Black

1. Introduction

This manual provides instructions for the SUPERONE Magnetic Ring Holder, Model Dual-Side Black. This accessory is designed to enhance phone handling, provide kickstand functionality, and offer versatile magnetic attachment options.

2. Package Contents

Verify that all items are present in the package:

• MagSafe Ring Holder (1 unit)
• Metal Ring (1 unit)
• Metal Plate (2 units)
• User Manual (1 unit)
• 18-Month Warranty & Life-time Customer Service Information

3. Compatibility

The SUPERONE Magnetic Ring Holder is compatible with a wide range of devices:

• MagSafe Compatible Devices: Directly attaches to iPhone 17/16/15/14/13/12 series and MagSafe-compatible cases.
• Non-MagSafe Devices: Compatible with non-magnetic phones and standard phone cases by utilizing the provided thin metal ring.

4. Setup and Installation

4.1 For MagSafe Compatible Devices/Cases

1. Ensure your iPhone (17/16/15/14/13/12 series) or MagSafe-compatible case is clean and dry.
2. Align the SUPERONE Magnetic Ring Holder with the MagSafe area on your device or case. The magnets will automatically snap into place.

4.2 For Non-MagSafe Devices/Cases

1. Clean the back surface of your phone or case thoroughly.
2. Peel the adhesive backing from the provided thin metal ring.
3. Carefully center and firmly press the metal ring onto the desired location on the back of your phone or case.
4. Important: Allow 24 hours for the adhesive to cure before attaching the MagSafe ring holder to the metal ring. This ensures a secure bond.

4.3 For Magnetic Surface Attachment (e.g., Car Mount, Walls)

1. For direct attachment to metallic surfaces (e.g., magnetic car mounts, refrigerators), simply place the back of the ring holder onto the surface.
2. For non-metallic surfaces (e.g., walls, mirrors, gym equipment), use the provided iron sheets. Clean the desired surface, peel the adhesive backing from an iron sheet, and firmly press it onto the surface.
3. Allow 24 hours for the iron sheet adhesive to cure before attaching the ring holder.

5. Operating Instructions

5.1 Using as a Phone Grip

• Extend the ring from the holder.
• Insert your finger(s) through the ring for a secure and comfortable grip, reducing the risk of accidental drops.

5.2 Using as a Kickstand

• Extend the ring and adjust the flexible arms to your desired viewing angle.
• The 360° rotatable stand supports both vertical and horizontal orientations for hands-free viewing of videos, calls, or work.

5.3 Dual-Sided Magnetic Attachment

• The ring holder features magnets on both sides, allowing it to attach to magnetic car mounts or other metallic surfaces without removal.
• For non-metallic surfaces, use the pre-installed iron sheets as described in Section 4.3.

5.4 Removable for Wireless Charging

• To use wireless charging, simply slide the ring holder off your phone.
• The magnetic attachment allows for easy removal and reattachment without leaving residue.

6. Key Features

• Dual-Sided Magnetic Design: Allows attachment to both the phone and external magnetic surfaces.
• Strong Magnetic Power: Equipped with 23 N55 magnets, providing a bearing weight capacity of up to 2200 grams (4.8 pounds).
• Flexible and Adjustable: Features 360° rotation and 180° flipping capabilities for optimal viewing angles. Designed to withstand up to 35,000 folds without loosening.
• Removable Design: Easily detaches for wireless charging or when not needed.

7. Maintenance

To ensure the longevity and optimal performance of your SUPERONE Magnetic Ring Holder:

• Wipe the surface with a soft, dry cloth to remove dust and fingerprints.
• Avoid using harsh chemicals or abrasive materials, as these may damage the finish or magnetic properties.
• Keep the magnetic surfaces clean and free of debris to maintain strong magnetic adhesion.

8. Troubleshooting

8.1 Weak Magnetic Connection to Phone

• Ensure your phone or case is MagSafe compatible.
• If using the metal ring for non-MagSafe devices, verify it was applied correctly and allowed to cure for 24 hours.
• Check for any obstructions (e.g., thick cases, foreign objects) between the ring holder and your device/case.

8.2 Weak Magnetic Connection to External Surfaces

• Ensure the external surface is metallic or that the provided iron sheet was properly installed and allowed to cure for 24 hours.
• Clean both the ring holder's external magnetic surface and the target surface to ensure optimal contact.

8.3 Ring/Stand Stiffness

• The hinges are designed to be stiff to provide stable support. This is normal operation.
• If movement becomes excessively difficult, ensure no debris is lodged in the hinge mechanism.

9. Specifications

10. Warranty and Support

SUPERONE provides comprehensive customer support for this product:

• Warranty: All SUPERONE products include an 18-month warranty.
• Technical Support: Lifetime technical support is available.
• Customer Service: For any questions or concerns, please contact the SUPERONE customer service team, available 24/7.